Novus Industrial Process ControllersShop Now
Thermal Devices Offers The Following Novus Controllers:
Novus Temperature Controller N1030
Novus Time and Temperature Controller N1040T
Novus Temperature Controller N1020
Novus Process Controller N120
Novus Temperature Controller N1040
Novus Temperature Controller N480D
Novus Universal Controller N2000 and DIN N2000S
Novus Temperature Controller N2020
Novus Universal Process Controller N3000
Novus Temperature Controller N1030T
Novus Temperature Controller N960
Novus Universal Controller N1100
Novus Universal Process Controller N1200
- See product description for controller specific features
Thermal Devices, an authorized Novus distributor, is proud to offer the complete line of Novus industrial process controllers. Novus manufactures a wide range of industrial process controllers, such as temperature control, humidity, pressure, flow, and other electrically measurable variables, through ON-OFF or PID algorithms with auto tuning. Thermal Devices can provide you with a Novus controller for almost any application. Contact a Thermal Devices’ Sales Engineer for more information! Or, request a quote.
Product LiteratureNOVUS N3000 Catalog Pages
NOVUS N2000 and N2000S Catalog Pages
NOVUS N1200 Catalog Pages
NOVUS N1040 Catalog Pages
NOVUS N1030 Catalog Pages
Novus Temperature Controller N1030:
N1030 is a temperature controller that features a high performance PID algorithm in a compact housing, with only 35 mm depth.Its compact construction and the convenient detachable connector provide an easy set up on short profile panels, optimizing the space and reducing costs. It has two outputs always available which can be configured both as a control or an alarm.
Novus Time and Temperature Controller N1040T:
N1040T is an economic and efficient Time and Temperature controller, developed with modern technology and automatic tuning of PID parameters, ON-OFF control and totally configurable. It has a reduced depth flameproof plastic enclosure. It has two independent timers with several operation modes that allow timer association to the controller output or to the temperature control. It accepts Pt100 sensors and thermocouples types J/K/T with decimals on all sensors. It has a fast electrical connection coupler system that reduces installation time. Single model with 4 configurable outputs for process control, alarm or timing. Configuration protection by password and factory calibration recovery.
Novus Temperature Controller N1020:
The temperature controller N1020 features advanced performance capability for the most complex and critical applications. Based on a high-end microprocessor and designed with a sophisticated auto-adaptive PID algorithm it continuously adjusts the PID parameters for best controlling performance. The programmable input, configurable dual output along with the full range power supply provide maximum flexibility in application. This 1/32 DIN size PID Controller has extremely small front dimensions of only 48×24 mm and is the right choice for controlling laboratory equipment when panel space is reduced.
Novus Process Controller N120:
N120 is a versatile process controller. It holds in one single instrument all the main features needed for the vast majority of industrial processes. It accepts most of the sensors and signals used in the industry and provides the main output types required by usual applications. A self-adaptive PID adjusts PID parameters providing the best performance for the process.
Novus Temperature Controller N1040:
The microprocessor based N1040 was conceived for low cost applications and yet achieving high degree of accuracy. It features a short depth enclosure of only 70 mm thus reducing panel space considerably. Another important innovation is the exclusive removable wiring connection block which translates into ease of use during installation process. It accepts Pt100 RTDs and thermocouples types J, K and T and features two outputs for control and alarm, universal power supply and automatic tuning of the PID paramenters. The N1040 is set to be the lowest cost temperature controller in the market while keeping high performance standards.
Novus Temperature Controller N480D:
The N480D series of PID temperature controllers was designed for non-experienced novice users for combining extreme simplicity in operation with high performance only found in expensive high end controllers. It is a low-cost instrument which can be easily installed and operated. It accepts most thermocoules and Pt100 RTD, features a relay and pulse output for driving solid state relays and optionally can be supplied with a linear 4 to 20 mA output. Autotunig PID function, dual display, full range universal power supply and ramps soak function are standard. It greatly surpasses the old and obsolete analog controllers in performance with ease of operation.
Novus Universal Controller N2000 and N2000S:
The N2000 Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes. With a sophisticated and consistent software and its advanced truly universal circuitry, the N2000 accepts configuration of both input signal and control output through the front keyboard without any internal hardware change. Power supply for remote loop powered transmitters is standard and is a must for high-end applications. From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC’s or SCADA networks, the N2000 is the right answer to your needs for industrial or laboratory automation. The N2000S is specific for applications in controlling servo motorized valves, servo actuators and dampers by means of two time proportional relays.
Novus Temperature Controller N2020:
N2020 PID temperature controller was designed to deliver high accuracy performance while keeping low cost. It features Auto/Manual function accessible via front keypad and several other advanced control characteristics.
Novus Universal Process Controller N3000:
N3000 Big Digit Universal Process Contoller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes. With a sophisticated and consistent software and its advanced truly universal circuitry, the N3000 controller accepts configuration of both input signal and control output through the front keyboard without any internal hardware change. Power supply for remote loop powered transmitters is standard and is a must for high-end applications. From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC or SCADA networks, the Universal Process Controller N3000 N3000 is the right answer to your needs for industrial or laboratory automation.
Novus Temperature Controller N1030T:
N1030T is a temperature controller with timer that features high performance PID algorithm, ideal for manufacturers of machines and equipment, in compact housing, with only 35 mm depth. Its compact size and the detachable connector provide and easy setup on thinner profile panels, optimizing space and reducing costs. It has two outputs always available in which both can be configured as control, alarm or timer output. It also has two independent timers and several operation modes that redirect to one of the controller outputs ou to act joined with temperature controller. It accepts sensors Pt100 and thermocouples J/K/T and it has a quick coupling electric connection that reduce installation setup time. N1030T is an excellent process controller where reliability and precision are demanded, besides cost effectiveness in PID controller.
Novus Universal Process Controller N1200:
N1200 is an advanced self-adaptive PID controller with an algorithm that constantly monitors the process performance and adjusts PID settings in order to always obtain the best possible control response. A single model is able to accept most industrial sensors and signals and provides all output types required to control different processes. All controller configuration can be achieved from the front panel without performing any hardware change. The multi-purpose inputs and outputs can be combined to provide tremendous versatility with extremely high accuracy in the most demanding applications.