Precision Digital Point to Multipoint Wireless Process Signal Field Unit PDW90-FN
Thermal Devices, an authorized Precision Digital distributor, proudly offers the Precision Digital Point to Multipoint Wireless Process Signal Field Unit PDW90-FN. PDW90 field units transmit analog, digital, and Modbus inputs from any location in the field to the PDW90 base station. Just set the network ID and Modbus address and put the field unit wherever there is a 24 VDC power and a process signal. Once it has been connected to the base station, it will transmit all signal connections wirelessly.
Usually Ships in 3-5 Business Days
$499.00
SKU: PDW90-FNPrecision Digital Point to Multipoint Wireless Process Signal Field Unit PDW90-FN
Features of the Point to Multipoint Wireless Process Signal Field Unit:
- Signal Wire Replacement in a Rugged, Industrial Housing
- Inputs and Outputs on Both Field Units
- Simple to Order, Configure, & Install
- 1 Mile Line-of-Sight, 500 Ft Indoor Range
- Inputs: Analog (4-20 mA, 0-10 V, 0-5 V, 1-5 V), Digital, and RS485 Modbus Communications
- Outputs: Analog (4-20 mA), Digital, and RS485 Modbus Communications
- Remote or Attached Antenna
- Repeaters Available
- Flanges for Wall or Pipe Mounting
- Software Available for Even Easier Setup
- NEMA 4X, IP68 Enclosure
Precision Digital Point to Multipoint Wireless Process Signal Field Unit PDW90-FN
Manufacturer | Precision Digital |
---|---|
Product Line | Point-to-Multipoint Wireless Process Signal Field Unit |
Input | Current (4-20 mA), Voltage (0-10 V), Modbus, Switch |
Precision Digital Code Number | PDW90-FN |
Output Options | 4-20 mA Output |
Power | 12-28 VDC |
Serial Comms | RS-485 Modbus |
Digital Inputs | 4 |
Lead Time | 3-5 Business Days (Call us at 301-831-7550 for next day shipping) |