Watlow Bulb and Capillary Thermostat Part Number 11W

The Watlow Bulb and Capillary Thermostat Part Number 11W from Thermal Devices, an authorized Watlow distributor. Thermostats regulate temperature in non-critical applications. They sense temperature, within a preset range and cycle heaters on and off to maintain the set point.

Usually Ships in 3-5 Business Days

$389.02

SKU: 11W

Watlow Bulb and Capillary Thermostat Part Number 11W

Thermostats may be mounted inside a terminal enclosure or remote mounted (separate from the heater assembly). If using a remote mounted thermostat, be sure to order the sufficient capillary tube length to permit installation. All Watlow thermostats are normally closed circuit and either single-pole, single-throw (SPST) or double pole, single-throw (DPST). They can be used with or without an enclosure. Thermostat selection should be based on temperature range, capillary tube length and sensor bulb size (diameter/length) (please refer to the Product Specifications tab for this information).

Watlow Bulb and Capillary Thermostat Part Number 11W

Manufacturer

Watlow

Product Line

Bulb and Capillary Thermostat

Control Mode

On-off with Manual Reset

Type

Single-Pole Single-Throw (SPST)

Temperature Range

Fixed 350 F Rating

Differential

N/A

Bulb Diameter

0.250 in.

Bulb Length

3.5 in.

Watlow Code Number

11W

Capillary Length

36 in.

Terminal Type

#10-32 Screw Lug

Enclosure

Moisture Resistant

Options

None

Lead Time

3-5 Business Days (Call us at 301-831-7550 for next day shipping)